Finding a leak in your roof can be the most difficult part of Roofing Repair in Louisville KY. Finding the exact spot from which drops of water fall through the roof is problematic since water may enter through one place and move to another site before it begins to saturate it. Homeowners that know they have a leaky roof also know that the roof is obviously worsening by the day.
If there is a missing or damaged tile, or when there are water stains on walls or in the ceiling, people should seriously consider hiring a professional. Finding the leak before it gets too bad is the point of routine maintenance.
How to find a leak on a roof
If the home has an attic, the best way to detect a leak is when it is raining. Water reflects off any kind of light, so grab a flashlight to find the leak. Once the origin of the water is located, mark the area.
After determining the location of the leak on the outside of the deck, apply roofer’s cement or place new tiles as needed. If you do not have an attic or simply cannot find the leak, a roofer should be hired to check common places that see major humidity problems, for example:
• Rubber sealants found around electrical and plumbing outlets
• Ventilation pipes
• Ventilation ducts
If it isn’t raining, use a garden hose
If a homeowner does not want to wait for it to rain again to look for the leak, use a garden hose and spray the roof. Let the water run over where you think the leak may be located. Do not go crazy with the water; be sure to start off little by little.
Ask someone to stand in the attic with a flashlight looking for water. Water reflects off the flashlight and makes it easier to see the leak. How does one know that a tile is damaged?
The revealing signs are when the top of the tile begins to shed sand (you will find sand accumulating in the gutter). Another sign would be noticing twigs, leaves, or anything else huddled under the tile. Request an estimate for more details.
