The grain auger is a type of device used in the agriculture industry in order to transport grain. It is constructed with a solid shaft that is contained in a large tube and has flighting all around it. The flighting is a type of flat steel spiral that is in the direct center of the shaft. As the spiral is turned in a direction going counter clockwise, the grain will be pulled up and then pushed into the actual shaft. Once it is in the shaft, it will be deposited into a hopper, which will use gravity in order to place the grain into the waiting container.
Grain Augers in Oregon are machines that are portable, which makes them extremely easy to transport with wheels that are attached to the bottle. They are able to be used on both large and small farms and can be as large as 60 feet long. Prior to being moved, the auger must be placed in its lowest position, or it may snag power lines while being moved.
There are guards that are placed on the intake end of the Augers in Oregon in order to prevent any unwanted materials from being pulled up into the shaft. The machines that do not have these types of guards have a risk of contaminating the grain by pulling in various foreign materials. The guards are usually triangular shaped and will cover the entire intake, only allowing the small grains to pass.
In most cases, the grain auger will only be used for a short period of time each year, at the time when grain is ripe and ready to be transported or stored. As a result, it is highly recommended that you seek yearly maintenance of the grain auger prior to the actual season that you are going to need the equipment. The maintenance will ensure that all of the parts are functioning properly and will lubricate the machine. This is an essential step to ensure that your grain auger is functioning properly prior to the time that you will need it for transporting your harvested grain.
For more information, visit online.
