Google+  

Zinc Plating vs. Zinc Alloy Plating

If you aren’t familiar with zinc, it is a brittle, hard metal that is found in various areas around the globe. Electroplating with zinc is an excellent alternative to using more expensive metals like platinum, silver, and gold. Companies who are looking for an affordable option for corrosion protection often choose this metal. It acts as a barrier that does not allow rusting to occur. In some cases, zinc is alloyed with other metals in the plating process. The most common combinations are zinc-nickel plating and zinc-tin plating. An alloy with nickel provides a significantly more effective corrosion protection element than zinc alone. Tin and zinc can also be a great option for avoiding corrosion. This alloy is often used in lieu of cadmium plating. In some cases, zinc-iron and zinc-cobalt are also used. Zinc is compatible with many plating baths, a benefit for the companies who choose zinc plating to use it. It can also be used in rack plating and barrel plating processes, giving even more variety. It can reach temperatures of up to 120 degrees Fahrenheit, which makes cooling costs minimal. In addition to that, it also has great adhesion and malleability. Zinc plating can take place with an acid, alkaline, or cyanide based electrolyte bath. The latter two options are best for items with large or complex parts, as a better thickness distribution is possible. It is also worth noting that barrel plating is the best option when you are coating small items such as bolts, nuts, and fasteners. While there are many applications where zinc coating excels, there are also some applications where it’s not the optimal option. Zinc coatings are not known for working well against alkalis and acids. An e-coat, plastic, or powder is likely to be better in this case. Seawater can also lead to problems in the durability of zinc,...

3 Benefits Provided by a Walk-In Clinic in Newtown

Just a few years ago most Newtown residents depended on hospitals for emergency medical care. Today they are just as likely to choose a Walk-In Clinic In Newtown. The small, self-contained medical centers have become very popular because they offer exceptional urgent and routine care. They are much less expensive than hospitals and usually far more convenient. Clinics are Easily Accessible Patients often use a Walk-In Clinic In Newtown simply because it is the closest urgent care facility. Most of them are actually designed to be neighborhood health centers. They are almost always closer to patients than area hospitals, which tend to be centrally located. Clinics also offer extended hours, making it simple for patients to get care before and after work and on weekends. Patients Can Save Money Many area residents begin using clinics for routine and emergency care after visiting company websites like esurgentcare.com. When patients visit the website, information advises them that the facilities accept many kinds of insurance as well as cash. Insured patients are only charged for co-pays, but even those who pay cash spend far less than they would for hospital emergency care. Clinics do not add hidden charges or include bed rentals or staff fees. Urgent care centers provide single bills for services and include everything, including any prescriptions that they fill. Walk-In Clinics Offer Convenience Perhaps the most common reason for the popularity of urgent care centers is their patient-centered approach. Unlike hospital emergency care, which can involve hours of waiting, clinics are designed to get patients registered, examined, treated and released as quickly as possible without sacrificing quality. Even those who walk in are usually seen in a short time. In fact, many busy patients now use clinics for needs such as school exams, vaccinations, and sports physicals. Since most centers now accept appointments, it is easy for patients to...

Benefits Of Residential System Installation Boulder CO

During the summer, a homeowners lawn and garden need to be watered regularly. If not, the hot sun will dry out the grass and the plants. Many homeowners will go outside and water their lawns and gardens themselves. There are others who have sprinkler systems installed. Of the two options, installing a sprinkler system is best. There are several reasons that the homeowner should consider Residential System Installation in Boulder, CO. Saves Time Most homeowners spend so much time at work and with their families that they don’t have the time to take on any additional daily tasks. If a lawn is going to remain healthy, it should be watered one or two times each day. If the homeowner has a large lawn, this can be very time-consuming. If they were to install a sprinkler system in the yard, they wouldn’t need to worry about taking time out of their busy lives to water the lawn. Sprinklers Can Be Set On a Timer There are certain times of the day that a lawn can be watered. Optimal watering times are either early in the morning before the sun comes up or late in the evening after the sun has gone down. If the homeowner waters the lawn when the sun is still out, the water can actually burn the grass, causing it to dry out further. Since most homeowners don’t have time early in the morning to water their lawn and they are too tired at the end of the day to water the lawn when the sun has gone down, installing a sprinkler system is the best option. The homeowner can set a timer so that the lawn is watered at the optimal times. Less Risk of Overwatering When a homeowner waters their lawn themselves, there is a good chance that they will lose track of time and...

Where Can A Person Find Pipe Bending In Seattle Washington?

In the Seattle Washington area, there are companies that specialize in the metal fabrication of many types. Pipe Bending in Seattle, Washington services can be very important if a customer needs pipes bent for special installations. Properly bending metal pipes to the exact specifications for a project requires the correct equipment with experienced operators to run it. The pipe must be bent to the correct angle without causing blockages or a break in the pipe that will cause leaking. There are much other metal cutting and forming services available from Specialty Metals. What Types Of Metal Are Available? Local companies such as Specialty Metals stock metals for fabrication jobs. These metals include stainless steel, carbon steel, aluminum in tube, bar, structural, sheet, or plate form. In addition, rare or specialty metals can be ordered and fabricated for the customer. Metal fabricating companies use cutting-edge equipment operated by trained technicians to fulfill customer specifications. They also supply pre-cut metals for customers to use on their own projects. Services To Look For Metal fabrication companies use cutting-edge equipment for laser cutting, water jet cutting, plasma arc cutting, oxy-fuel cutting, Amada plate saw, and shearing. They also have equipment for Pipe Bending in Seattle, Washington services. These companies can help customers with custom lettering, signage, and metal parts for customer projects. They have the equipment to provide forming with press brake dies and more services. They have the latest CAD services to aid in product design and manufacture. Companies who need sheet metal, tubing and other raw materials for their own manufacturing projects can purchase them from these companies at reasonable prices. There are experts on staff to assist the customer with project design and specifications. These experts can explain the production process from start to finish. Manufacturers and specialty companies can envision a metal product and see it become a reality...

Medical Coatings and Medical Device Coating Suppliers

Implements that are used every day in medical applications usually require a coating to be effective and avoid infection. Coatings can range from lubricating to antimicrobial. Medical device coating suppliers will assist manufacturers and practitioners in obtaining the proper coatings for the job. Antimicrobial Coatings Sanitation is of paramount importance in any medical setting. Many medical procedures are invasive by nature, and the introduction of bacteria secondary to the existing medical disorder should be avoided. Deadly staph infections are becoming more common in hospitals. Antimicrobial coatings should be used on any implements that come into contact with blood, urine, and other bodily fluids. These coatings not only sanitize the instrument but release agents that can fight deadly infections. Lubricant Coatings Lubricants allow devices to be inserted into bodily openings or other devices. Lubricants reduce friction that can cause a patient pain, such as during catheter insertion. These agents are regulated by the FDA and must not flake or expand when in contact with bodily fluids or water. They must also retain their lubricant properties during repeated use. Hydrophilic Coatings Hydrophilic coatings are sophisticated and produce a surface with increased wettability. The process of applying hydrophilic coatings yields a surface that helps bind water to the implement being used. These coatings can be permanent or temporary, depending upon the purpose of the implement. The coating process usually requires covering the instrument or apparatus with a coating agent and then drying or curing, utilizing heat or ultraviolet light. In all cases, it is critical to find a vendor that can effectively apply these coatings, using materials that meet current standards. The best vendors conduct their own testing of products so that the purchaser does not have to test before using. When interviewing vendors, purchasers should make sure they are fully informed about that vendor’s processes, equipment, and adhesion to current applicable...

« Older Entries Next Entries »